| This graph shows the value of all S.M.A.R.T attributes of drive sde (Maxtor 6H500F0). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive. | |||||
| Field | Internal name | Type | Warn | Crit | Info |
|---|---|---|---|---|---|
| Airflow_Temperature_Cel | Airflow_Temperature_Cel | gauge | 000: | ||
| Calibration_Retry_Count | Calibration_Retry_Count | gauge | 223: | ||
| Current_Pending_Sector | Current_Pending_Sector | gauge | 000: | ||
| Data_Address_Mark_Errs | Data_Address_Mark_Errs | gauge | 000: | ||
| Hardware_ECC_Recovered | Hardware_ECC_Recovered | gauge | 000: | ||
| High_Fly_Writes | High_Fly_Writes | gauge | 000: | ||
| Load_Cycle_Count | Load_Cycle_Count | gauge | 000: | ||
| Multi_Zone_Error_Rate | Multi_Zone_Error_Rate | gauge | 000: | ||
| Offline_Uncorrectable | Offline_Uncorrectable | gauge | 000: | ||
| Power_Cycle_Count | Power_Cycle_Count | gauge | 000: | ||
| Power_Off_Retract_Count | Power_Off_Retract_Count | gauge | 000: | ||
| Power_On_Hours | Power_On_Hours | gauge | 000: | ||
| Reallocated_Event_Count | Reallocated_Event_Count | gauge | 000: | ||
| Reallocated_Sector_Ct | Reallocated_Sector_Ct | gauge | 063: | ||
| Run_Out_Cancel | Run_Out_Cancel | gauge | 180: | ||
| Seek_Error_Rate | Seek_Error_Rate | gauge | 000: | ||
| Seek_Time_Performance | Seek_Time_Performance | gauge | 187: | ||
| Soft_ECC_Correction | Soft_ECC_Correction | gauge | 000: | ||
| Soft_Read_Error_Rate | Soft_Read_Error_Rate | gauge | 000: | ||
| Spin_Buzz | Spin_Buzz | gauge | 000: | ||
| Spin_High_Current | Spin_High_Current | gauge | 000: | ||
| Spin_Retry_Count | Spin_Retry_Count | gauge | 157: | ||
| Spin_Up_Time | Spin_Up_Time | gauge | 063: | ||
| Start_Stop_Count | Start_Stop_Count | gauge | 000: | ||
| Temperature_Celsius | Temperature_Celsius | gauge | 000: | ||
| Thermal_Asperity_Rate | Thermal_Asperity_Rate | gauge | 000: | ||
| UDMA_CRC_Error_Count | UDMA_CRC_Error_Count | gauge | 000: | ||
| Unknown_Attribute | Unknown_Attribute | gauge | 000: | ||
| smartctl_exit_status | smartctl_exit_status | gauge | 1 | ||