| This graph shows the value of all S.M.A.R.T attributes of drive sda (Maxtor 7V300F0). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive. | |||||
| Field | Internal name | Type | Warn | Crit | |
|---|---|---|---|---|---|
| Airflow_Temperature_Cel | Airflow_Temperature_Cel | gauge | None | 000: | |
| Calibration_Retry_Count | Calibration_Retry_Count | gauge | None | 223: | |
| Current_Pending_Sector | Current_Pending_Sector | gauge | None | 000: | |
| Hardware_ECC_Recovered | Hardware_ECC_Recovered | gauge | None | 000: | |
| High_Fly_Writes | High_Fly_Writes | gauge | None | 000: | |
| Load_Cycle_Count | Load_Cycle_Count | gauge | None | 000: | |
| Multi_Zone_Error_Rate | Multi_Zone_Error_Rate | gauge | None | 000: | |
| Offline_Uncorrectable | Offline_Uncorrectable | gauge | None | 000: | |
| Power_Cycle_Count | Power_Cycle_Count | gauge | None | 000: | |
| Power_Off_Retract_Count | Power_Off_Retract_Count | gauge | None | 000: | |
| Power_On_Hours | Power_On_Hours | gauge | None | 000: | |
| Reallocated_Event_Count | Reallocated_Event_Count | gauge | None | 000: | |
| Reallocated_Sector_Ct | Reallocated_Sector_Ct | gauge | None | 063: | |
| Run_Out_Cancel | Run_Out_Cancel | gauge | None | 180: | |
| Seek_Error_Rate | Seek_Error_Rate | gauge | None | 000: | |
| Seek_Time_Performance | Seek_Time_Performance | gauge | None | 187: | |
| Shock_Count_Write_Opern | Shock_Count_Write_Opern | gauge | None | 000: | |
| Shock_Rate_Write_Opern | Shock_Rate_Write_Opern | gauge | None | 000: | |
| Soft_Read_Error_Rate | Soft_Read_Error_Rate | gauge | None | 000: | |
| Spin_Buzz | Spin_Buzz | gauge | None | 000: | |
| Spin_High_Current | Spin_High_Current | gauge | None | 000: | |
| Spin_Retry_Count | Spin_Retry_Count | gauge | None | 157: | |
| Spin_Up_Time | Spin_Up_Time | gauge | None | 063: | |
| Start_Stop_Count | Start_Stop_Count | gauge | None | 000: | |
| TA_Increase_Count | TA_Increase_Count | gauge | None | 000: | |
| Temperature_Celsius | Temperature_Celsius | gauge | None | 000: | |
| UDMA_CRC_Error_Count | UDMA_CRC_Error_Count | gauge | None | 000: | |
| Unknown_Attribute | Unknown_Attribute | gauge | None | 000: | |
| smartctl_exit_status | smartctl_exit_status | gauge | 1 | None | |